Bondtech CHT® Coated Brass Nozzle
They are manufactured by Bondtech in-house and will fit the following hotends/blocks:
Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.
Registration number: EP3445568A1
Nozzles for 3D printers made of metal with at least one or a multitude of holes to increase the surface area of the heating walls.
A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.
Use this nozzle with the following materials:
For technical and abrasive materials we recommend to use other nozzles in bondtech range
We recommend you to have several sets of nozzles because:
Using different materials with the same nozzles causes deposit build-up inside the nozzle.
These deposits will cause blockages.
We recommend changing nozzles when changing materials.
Heat up the heat block up tp 280C, or at least above 250C, before removing or tightening any Bondtech CHT nozzle.
Use at most 1.5 Nm torque.
For more details visit - https://www.bondtech.se/product/bondtech-cht-coate...