ER 11 A Collet Nut

ER 11 A Collet Nut

• Precision ground ID thread and taper
• ER11 A Collet Nut has an id thread of 14mm X .75 pitch
• Outside diameter is .748 inches (19mm)
• Outside has a hex for tightening
• Black oxide finished
• Suitable for 1/4 inch, 1/8 inch, 6mm collet on our website

This only work with ER-11 spindles. They do not fit commercial routers or rotary tools, like DeWalt, Bosch, Dremel, Porter Cable, etc.

This listing is for 01 pc of Nut