Nema 34 Stepper Motor (86CM35) - Original LEADSHINE
Model # 86CM35
This is high torque original leadshine Nema 34 stepper motor. Suitable for making desktop CNC Routers, plasma cutters, 3d printers, plotters and various other applications requiring high torque.
Please contact us for any other stepper driver requirements.
|Frame Size (NEMA)||34|
|Holding Torque (N.m)||3.5/ 35.69 KG CM|
|Phase Current (A)||4.0|
|Shaft Diameter (mm)||12.7/0.5inch|
|Center Diameter (mm)||73|
Use Original LEADSHINE stepper drivers DM 556E for this motor.
Use 40mm OR 40mm + 6mm M5 aluminium spacers to mount the nema 23 and nema 34 stepper motors.
Use stepper motor wire extension cable - https://www.3dprintronics.com/Stepper-Motor-Extens...
Click here for DATASHEET
Connecting the motor directly to a power supply will destroy the motor and void the warranty. If you want to check your motor make sure it is connected to a constant current / recommended drive controller.
This motor is large enough that the back EMF generated from stalling or changing directions could easily damage your motor controller. Please do your research before purchasing this motor.