Good machine and work perfectly.
Openbuilds BlackBox Motion Control System X32
Delivery time 1 to 2 weeks after order payment
OpenBuilds BlackBox Motion Control System X32 (32 Bit)
- This is a Genuine OpenBuilds BlackBox Motion Control System X32 (32 Bit)
- All in One Plug and Play CNC controller for - CNC Routers, Laser Cutters, Plasma Cutters or any other CNC Machine.
- Fully Assembled | 100% Support provided by 3DPrintronics in India.
- OpenBuilds Control Software for easy setup and use.
- Use this with a Genuine Meanwell Power Supply to ensure correct voltage is applied for optimum performance.
- Please read the Docs link carefully before operating.
Know More at Below Links
Setup & Confirguration | OpenBuilds Product Link | OpenBuilds Control Software Community Support
Product Specifications
Microcontroller:
- High performance 32 Bit Processor
- USB Interface for Plug and Play
- WIFI Support
- SD Card Support
Stepper Drivers:
- 4 x High Powered 4.0A (Peak) Stepper Drivers
- Up to 1/32nd Microstepping (Defaulted to 1/8 for higher torque)
- Built in Cooling solution / through airflow design
- Easy current adjustment
- Capable of true 2/3/4 axes motion control
- Rotary
- CoreXY
- Cartesian
- Polar
Outputs:
- Dual configurable onboard Relays for Plasmas, Spindles, etc
- Router (Enable) and VFD Spindle (Direction, Enable, 0-10v) Supported
- PWM Output for Lasers
- Servo Output for Pen Plotters
- Pick and Place solenoid VAC
- Controlled Air Assist
- Up to 24v 5A Switched Output for Coolant or LED devices
Inputs:
- 3x Optocoupled Endstop Inputs with power supply (5/24v). Suitable for passive or active mechanical, optical and inductive switches
- 1x Optocoupled XYZ Probe Input
- Door sensor input
Connectivity:
- WiFi
- USB
- SD
- Bluetooth
- Xtension System
- WEB UI
Mechanical:
- Easy V-Slot/C-Beam compatible mounting
- Dimensions: 171mm (Mounting flange included) x 80mm x 36.4mm
Compatibility:
- Supported by OpenBuilds CONTROL software
- Supports OpenBuilds Interface
- Supports GrblHAL Firmware
Please Note
- This is Genuine OpenBuilds BlackBox controller X32 which we have imported from Openbuilds so that Indian Maker community can access this awesome little controller within faster time frames, avoiding customs, import hassles and economical price range as compared to getting a single controller for individual use.
- Incorrect wiring of Endstops can damage your controller. Please refer to this link for correct endstop wiring or contact us if you have a different type of endstop. Alternatively, you can include pre-wired endstops from the options with your order.
- Please note ultimate responsibility to successfully run and operate this product lies with the user. We are not liable for user not being able to run/operate this device. Kindly read the product documentation carefully regarding all the details.
What To Do When BlackBox X32 is Not Detected in Open Builds Control Software?
1) Connect BlackBox X32 to your pc through USB cable.
2) Run Open Builds Control Software.
3) See on which COM port Black Box has been detected.
4) If you can not see any com port in Open Builds Control -- Then Download & Install Drivers as per your computers operating system. Download link given below.
5) For Windows users. Once you download the ZIP folder -- Unzip it -- inside the unzipped folder you will see the following two installers as mentioned below.
If your operating system is 32 bit -- then run CP210xVCPInstaller_x86 to install the drivers.
If your operating system is 64 bit -- then run CP210xVCPInstaller_x64 to install the drivers.
6) Once the drivers have been successfully installed. Unplug the USB cable from the computer and restart the computer & BlackBox Controller Unit.
7) After restart plug the usb cable -- run open builds control software -- see which com port is shown (select it) and then click on the connect button.
8) Your BlackBox X32 is now connected to Open Builds Control Software.
Download & Install Drivers for BlackBox X32 Version 1.4 onwards
For Windows - Click Here
For Apple MacOS - Click Here





Dear Mukesh, We are glad you loved our V Slot and C Beam based Mini Mill CNC machine mechanical build. We are excited to see what you built out of it! Do share some pictures or videos. Please come back for more such exciting machines and products.