Openbuilds BlackBox Motion Control System X32

Delivery time 1 to 2 weeks after order payment

OpenBuilds BlackBox Motion Control System X32 (32 Bit)

• This is a Genuine OpenBuilds BlackBox Motion Control System X32 (32 Bit)
• All in One Plug and Play CNC controller for - CNC Routers, Laser Cutters, Plasma Cutters or any other CNC Machine.
• Fully Assembled | 100% Support provided by 3DPrintronics in India.
• OpenBuilds Control Software for easy setup and use.
• Use this with a Genuine Meanwell Power Supply to ensure correct voltage is applied for optimum performance.
• Please read the Docs link carefully before operating.

Know More at Below Links

Setup & Confirguration | OpenBuilds Product Link | OpenBuilds Control Software Community Support

Product Specifications

Microcontroller:

• High performance 32 Bit Processor
• USB Interface for Plug and Play
• WIFI Support
• SD Card Support

Stepper Drivers:

• 4 x High Powered 4.0A (Peak) Stepper Drivers
• Up to 1/32nd Microstepping (Defaulted to 1/8 for higher torque)
• Built in Cooling solution / through airflow design
• Easy current adjustment
• Capable of true 2/3/4 axes motion control
• Rotary
• CoreXY
• Cartesian
• Polar

Outputs:

• Dual configurable onboard Relays for Plasmas, Spindles, etc
• Router (Enable) and VFD Spindle (Direction, Enable, 0-10v) Supported
• PWM Output for Lasers
• Servo Output for Pen Plotters
• Pick and Place solenoid VAC
• Controlled Air Assist
• Up to 24v 5A Switched Output for Coolant or LED devices

Inputs:

• 3x Optocoupled Endstop Inputs with power supply (5/24v). Suitable for passive or active mechanical, optical and inductive switches
• 1x Optocoupled XYZ Probe Input
• Door sensor input

Connectivity:

• WiFi
• USB
• SD
• Bluetooth
• Xtension System
• WEB UI

Mechanical:

• Easy V-Slot/C-Beam compatible mounting
• Dimensions: 171mm (Mounting flange included) x 80mm x 36.4mm

Compatibility:

• Supported by OpenBuilds CONTROL software
• Supports OpenBuilds Interface
• Supports GrblHAL Firmware

Please Note

• This is Genuine OpenBuilds BlackBox controller X32 which we have imported from Openbuilds so that Indian Maker community can access this awesome little controller within faster time frames, avoiding customs, import hassles and economical price range as compared to getting a single controller for individual use.
• Incorrect wiring of Endstops can damage your controller. Please refer to this link for correct endstop wiring or contact us if you have a different type of endstop. Alternatively, you can include pre-wired endstops from the options with your order.
• Please note ultimate responsibility to successfully run and operate this product lies with the user. We are not liable for user not being able to run/operate this device. Kindly read the product documentation carefully regarding all the details.

What To Do When BlackBox X32 is Not Detected in Open Builds Control Software?

1) Connect BlackBox X32 to your pc through USB cable.

2) Run Open Builds Control Software.

3) See on which COM port Black Box has been detected.

4) If you can not see any com port in Open Builds Control -- Then Download & Install Drivers as per your computers operating system. Download link given below.

5) For Windows users. Once you download the ZIP folder -- Unzip it -- inside the unzipped folder you will see the following two installers as mentioned below.

If your operating system is 32 bit -- then run CP210xVCPInstaller_x86 to install the drivers.

If your operating system is 64 bit -- then run CP210xVCPInstaller_x64 to install the drivers.

6) Once the drivers have been successfully installed. Unplug the USB cable from the computer and restart the computer & BlackBox Controller Unit.

7) After restart plug the usb cable -- run open builds control software -- see which com port is shown (select it) and then click on the connect button.

8) Your BlackBox X32 is now connected to Open Builds Control Software.

Download & Install Drivers for BlackBox X32 Version 1.4 onwards

For Windows - Click Here

For Apple MacOS - Click Here