Original Prusa Enclosure

Original Prusa Enclosure

Introducing Original Prusa Enclosure: Modular box for your 3D printer.

Enclosures mainly help with stabilizing the inner environment and raising ambient temperatures, which is vital for printing materials such as ASA, PC-CF, PP, and others that have a tendency to warp. We also prepared a handful of add-ons that cater to any of your specific needs.

The Original Prusa Enclosure is shipped disassembled as a kit.

3D printer shown inside the enclosure is not provided with the enclosure.

Original Prusa Enclosure is an accessory for your 3D printer that houses your Original Prusa i3 MK3S+ or MK4 and provides a stable printing environment. The Enclosure helps to reduce odors from certain materials, lowers noise, can be equipped with useful addons for increased safety and/or the possibility to run the printer in public spaces and helps with printing advanced materials due to the passive heat coming from the heatbed (prevents warping). There is enough headroom above the printer inside the enclosure to mount the MMU2S unit.

Everything is included in the package, including plastic parts, so you don’t need to print anything on your own. The only exceptions are the optional LCD supports and handles (seen in some photos) and the silver PSU retainer. In case you would like to mount the display outside of the enclosure, you can simply print the LCD supports at any time. Assembly instructions are available online.

MAIN FEATURES

TECHNICAL PARAMETERS

• Dimensions with the LCD mounted outside: 530 mm (w) × 545 mm (h) × 715 mm (d)
• Dimensions with the LCD inside: 530 mm (w) × 545 mm (h) × 640 mm (d) At least 250 mm is required in front of the enclosure for the doors to fully open
• Enclosure type: Passive, heating provided only by the 3D printer’s heatbed
• Weight: 10,6 kg (23.4 lbs)
• Max stackable units: up to 5 (with more than 3 enclosures, anchoring to a wall is recommended)
• The basic package contains: All components required to build the enclosure (frame parts, transparent side panels, top and bottom panels, mounting material, printer frame brace), temperature sensor, and documentation. Handles and optional 3D-printed accessories seen in some photos are not included in the package.

ADD-ONS (Currently offered)

Future ADD-ONS (Not Yet Released)

Smart Box

Optional electronics that serve as an interface between the MK3S+ and various add-ons, mainly the advanced filtration system. The Smart Box will allow communication with various additional equipment, such as advanced thermal sensors, RGB LEDs, humidity meters, a microparticle sensor and also an electronic lock. All the devices can work together, so, for example, when the printer finishes a job, the RGB LEDs will signal the print is done. However, the door will remain locked and the advanced filtration system will increase the power to maximum RPM to clean the air in the chamber quickly. Once the sensors detect the conditions are optimal, the electronic lock is automatically released.

We’re currently preparing the following add-ons:

• Smart RGB LEDs
• Electronic lock
• RFID reader
• Advanced temperature sensors
• Humidity sensor
• Microparticle sensor